saw filter for umts band11 murata part number : SAFEA1G43KA0F00 jan. 25, 2010 marking : laser printing package dimensions specification 1/4 (1) (4) others unit : unbalance port : unbalance port : ground : mm nominal center frequency(fc) 2.3 db max. 2.1 db max. 1.7 db 1) 470 to 770 mhz 30 db min. 30 db min. 41 db 2) 810 to 895 mhz 30 db min. 30 db min. 41 db 3) 921 to 960 mhz 30 db min. 30 db min. 41 db 4) 1475.9 to 1495.9 mhz 35 db min. 35 db min. 48 db 5) 1573 to 1577 mhz 35 db min. 35 db min. 50 db 6) 1805 to 1880 mhz 30 db min. 30 db min. 49 db 7) 1930 to 1990 mhz 30 db min. 30 db min. 47 db 8) 2110 to 2170 mhz 30 db min. 30 db min. 46 db 9) 2400 to 2500 mhz 30 db min. 30 db min. 41 db 10) 2620 to 2690 mhz 30 db min. 30 db min. 38 db 11) 2855.8 to 3001.8 mhz 30 db min. 30 db min. 37 db 12) 4283.7 to 4358.7 mhz 25 db min. 25 db min. 32 db 13) 5711.6 to 5811.6 mhz 25 db min. 25 db min. 33 db 14) 7139.5 to 7264.5 mhz 25 db min. 25 db min. 40 db ripple deviation 20mw (+13dbm), 2000 hours 1.8 max. vswr item target specification -30 to 85c 252c typ. (1427.9 to 1447.9mhz) insertion loss (1427.9 to 1447.9mhz) 1.2db max. 0.7 1437.9mhz 1.2db max. absolute attenuation input signal level unbalance port matching impedance (nominal) 50 w 1.4 1.8 max. (1427.9 to 1447.9mhz) db h d 1.35 0.05 5-0.25 0.05 0.4 0.1 2-0.25 0.05 5-0.325 0.050 (0.075) 2-0.25 0.05 (0.05) (1) (2) (3) (5) (4) (0.17) dot marking( ? 0 .3 ) 1.05 0.05 2-0.25 0.05 (5) (4) (2) (3) (1)
saw filter for umts band11 murata part number : SAFEA1G43KA0F00 jan. 25, 2010 frequency performance 2/4 2/4
saw filter for umts band11 murata part number : SAFEA1G43KA0F00 jan. 25, 2010 3/4 dimensions of carrier tape dimensions of reel SAFEA1G43KA0F00r14 4000pcs/reel SAFEA1G43KA0F00r12 2000pcs/reel dimensions of tape unit: mm unit: mm 160 ... 1 9 0 80 ...1 2 0 4 0 0 ... 56 0 trailer tape components leader cavity unit : m m 2.0 0.5 9.0 0.5 13 .5max. ( ? 60) ?? 1 7 8 ) ? 13.0 0.5 direction of feed cover tape 4.0 0.1 2 . 0 0 0. 05 3 max. +0.1 ? 0.8 -0.0 1.3 0.1 0.30 0. 05 1.6 0.1 3 max. 0.70 0.10 8.0 0.2 3.50 0.0 5 1.75 0.10 4.0 0.1 +0.1 ? 1.5 -0.0 h d h d h d
saw filter for umts band11 murata part number : SAFEA1G43KA0F00 jan. 25, 2010 4/4 recommended land pattern test circuit ? this pdf datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf datasheet has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 50 50 : land pattern unit : mm 0.25 1.3 0.25 0.325 0.425 0.425 0.325 0.525 0.25 1.6 0.25 0.325 0.525 1 5 4 2 3
|